采动影响区抽采钻井井身固化及抽采效果考察

为提高地面瓦斯抽采效果,对抽采期间钻井进行了窥视,发现当回采工作面推过地面钻井位置后,钻井井壁迅速破坏,无法充分发挥其应有的瓦斯抽采效应。通过对煤层顶板岩层受采动影响顶板活动过程的分析,优化地面抽采钻井井身结构,在原有的施工工艺上增加三开下筛管,增强钻孔的防护强度,抽采浓度提高了1.54.5倍,抽采纯量提高了1.55倍,工作面回风流和回风隅角瓦斯浓度显著下降,抽采效果明显提高。     

Upscaled DEM-CFD model for vibrated fluidized bed based on particle-scale similarities

Simulation based on discrete element method (DEM) coupled with computational fluid dynamics (CFD), coupled DEM-CFD, is a powerful tool for investigating the details of dense particle–fluid interaction problems such as in fluidized beds and pneumatic conveyers. The addition of a mechanical vibration to a system can drastically alter the particle and fluid flows; however, their detailed mechanisms are not well understood. In this study, a DEM-CFD model based on a non-inertial frame of reference is developed to achieve a better understanding of the influence of vibration in a vibrated fluidized bed. Because the high computational cost of DEM-CFD calculations is still a major problem, an upscaled coarse-graining model is also employed. To realize similar behaviors with enlarged model particles, non-dimensional parameters at the particle scale were deduced from the governing equations. The suitability and limitations of the proposed model were examined for a density segregation problem of a binary system. To reduce the computational costs, we show that the ratio between the bed width and model particle size can be reduced to a minimum value of 100; to obtain similar segregation behaviors, the ratio between the bed height and model particle size is considered unchanged.     

基于加权法的砾类土含水率检测

砾类土在工程建设中有着广泛的应用,其含水率是一项非常重要的指标,但现有测试方法耗时较长。以砂砾石料的砾类土为试验对象,基于加权法思想,将饱和面干含水率替代法和虚拟比重法进行结合,开展砾类土含水率快速检测方法的研究,并对现有的饱和面干含水率测定操作进行一定的改进和优化。采用多种数学方法(绝对误差、均方偏差平方和,相关曲线的相关系数和F显著性检验分析法)对加权法和烘干法的结果进行对比分析。通过试验统计数据分析,证实加权法与烘干法的测定结果基本一致。该分析结果为现场土料含水率快速测定提供了一种新的思路和手段。     

表面形貌对粗糙接触界面流体润滑特性的影响

为探究不同表面形貌对粗糙接触界面液体润滑特性的影响，基于有限差分法结合雷诺方程和膜厚方程，研究阶梯形貌、波纹形貌、随机形貌和峡谷形貌4种不同粗糙接触界面液体润滑时的载荷分布及规律。研究发现：4种粗糙表面的三维载荷分布规律都与其表面形貌相对应，在波“峰”处载荷大，摩擦力随载荷的增大而增大，在波“谷”载荷小，摩擦力随载荷减小而减小；4种粗糙表面的载荷随表面展开面积比的变化趋势却有所不同；随表面展开面积比的增大，阶梯形貌表面的载荷呈线性增大，波纹形貌表面的载荷基本不变，随机分布形貌表面的载荷呈增大趋势，峡谷形貌表面的载荷呈先增大后减小的变化趋势。研究结果可以进一步补充现有表面形貌表征和流体润滑等相关研究理论。     

Modeling of dibenzothiophene oxidative desulfurization using response surface methodology

The effect of reaction temperature, mixing speed and oxidant to catalyst volume ratio, including their interactions on the oxidative desulfurization of dibenzothiophene by using response surface methodology was studied. Hydrogen peroxide was used as oxidant and acetic acid as catalyst. The obtained model accurately predicts conversion of dibenzothiophene and the best conversion of 98.7% was observed at temperature 70°C, mixing speed of 1250 rpm and oxidant to catalyst volume ratio of 1:1. At high temperatures, a major limitation of the desulfurization process is the mass transfer and the high mixing speed is needed to achieve an efficient process.     

Modeling and surface texturing on surface roughness in machining LaPO4–Y2O3 composite

In this work, lanthanum phosphate with a 20% yttria (LaPO₄/Y₂O₃) composite prepared by an Aqueous Sol–Gel process is machined using an Abrasive Water Jet Machine (AWJM). The machinability of this composite is studied by varying the input parameters namely Jet Pressure (JP), Stand-Off Distance (SOD), and Traverse Speed (TS) on Surface finish. Garnet of 80 mesh size is used as an abrasive with a flow rate of 85?g/min. The microstructural characterization study reveals the presence of new element YPO₄. This element enhances the machinability and reduced porosity in the composite. Microscopy examinations on the machined surface reveals that partial overlapping at low JP, poor surface finish at high JP and SOD, forged deficiency at maximum SOD and TS. The minimum levels of all input parameters are influenced to obtain acceptable Ra. Atomic Force Microscopy (AFM) on the kerf surface shows micro wear track and peaks. The Multiple Regression Analysis (MRA) is developed for Ra to check the adequacy. From the Analysis of Variance (ANOVA), SOD has a significant effect on Ra with a contribution of 53%. The influence of JP and TS on Ra is found to be 31% and 15%, respectively.     

Surface modification of poly(tetrafluoroethylene) and poly(ethylene terephthalate) films via environmental crazing

This work addresses the phenomenon of the development of a patterned surface relief on polymer films via different modes of environmental crazing. Commercial films of semicrystalline poly(tetrafluoroethylene) (PTFE) and amorphous glassy poly(ethylene terephthalate) (PET) were subjected to tensile drawing in the presence of physically active liquid environments (carbon tetrachloride or aliphatic alcohols). The structure parameters and wettability of the modified films were studied by AFM, SEM, profilometer measurements and contact angle measurements. Environmental intercrystallite crazing of PTFE is accompanied by the development of an unstable structure with a high free surface, which experiences marked strain recovery upon unloading. As a result of the relief formation, PTFE hydrophobicity is enhanced (the water contact angle increases by 25°). Classical environmental crazing of PET films is accompanied by the formation of an anisotropic surface relief which is an assembly of crazes oriented perpendicular to the direction of tensile drawing, thus leading to the phenomenon of anisotropic wetting. The proposed approach for structural surface modification makes it possible to use the advantages of surface instability and spontaneous self‐organization of the polymer towards the development of a unique surface microrelief. © 2020 Society of Chemical Industry     

辊式涂布法构建纸基牢固超疏水表面

采用辊式涂布的方法在纸基材料上构建超疏水表面，并对超疏水表面的牢固性、自清洁性和疏水性能进行评价。用γ-氨丙基三乙氧基硅烷和1H,1H,2H,2H-全氟辛基三乙氧基硅烷（POTS）对微米级和纳米级两种尺寸的TiO₂粒子进行疏水改性处理，然后将改性后的微/纳米TiO₂涂布在纸基材料表面。采用红外光谱（FTIR）对改性后的微/纳米TiO₂的化学组成进行了分析，采用扫描电镜（SEM）对涂布纸表面结构进行了表征，通过接触角、耐磨性和自洁净测试评价了涂层表面的超疏水性、牢固性和自清洁性。改性TiO₂的FTIR分析显示在1000～1500cm^-1之间出现多个C—F键的伸缩振动峰，表明POTS通过化学键与TiO₂表面发生了结合。涂布纸表面的SEM分析可以看出，纸基材料表面上均匀分布了微米和纳米尺寸的TiO₂颗粒，具备了类似荷叶表面微-纳结构的粗糙表面。涂层表面的水接触角为153°±1.5°，滚动角为3.5°±0.5°，水滴在涂层表面呈球形，极易滑落，涂层在水中浸泡7天后，接触角没有发生明显变化，表明纸张表面具备了优异的超疏水性能，且疏水稳定性较好。涂层表面经过10次循环磨损试验后，接触角仍能达到150°，滚动角为9°，表明机械摩擦没有对涂布纸表面的化学成分和粗糙结构造成明显的破坏，超疏水表面的牢固性较好。自洁净测试表明，涂布纸表面具有良好的自清洁和防污性能。该工艺过程操作简单，易于实现工业化生产，为在纸基表面构建综合性能优异的超疏水表面提供了一种新的便利途径。     

加热面朝下的池沸腾汽泡动态行为研究

基于Matlab软件开发了自动识别气液两相流界面程序，程序可获得气液界面变化、汽膜厚度、汽膜脱离周期和汽膜法向速度等特征。利用该程序对沟槽结构加热表面朝下布置时，在不同倾角、不同热流密度下的汽泡动态数据进行了处理和分析。结果表明：加热表面朝下发生核态沸腾时，汽膜厚度随热流密度的增大而增大，汽泡脱离周期随热流密度的增大先减小，而后维持在一稳定值；汽膜脱离周期随倾角的增大而减小，倾角为5°时的汽膜脱离周期稳定在0.27 s左右。当发生沸腾危机时，汽膜厚度迅速减小，这可作为动态监测加热表面沸腾状态的依据。